Plane crash AN-12 near Domodedovo Airport. 2007
other
Plane crash AN-12 near Domodedovo Airport. 2007

Plane crash AN-12 airlines 'Atran' in the area of ​​the Domodedovo airport

  • Date of the crash: November 29.07.2007, XNUMX

  • Time of the crash: 04:17

  • Country of the crash: Russia

  • Location of the crash: Moscow region, 4 km. Domodedovo airport to the north, in a forest near the northern edge of the cemetery Domodedovo

  • aircraft Brand: An-12BP

  • Registration of aircraft: RA93912

  • Name of air carrier: Atran

  • Flight: LE-9655

Chronology of events:

The aircraft produced Domodedovo flight - Komsomolsk-on-Amur to 9043 kg of cargo in boxes of aircraft parts. Alignment and take-off weight is not within range.

After 20 seconds of separation from the strip 32R, at an altitude of 70-75 m and a speed of about 295 km / h, was almost simultaneous failure of the right engine (№3i №4), caused by a bird hit them. Propellers zaflyugirovalis automatically.

The crew turned the aircraft to stabilize the situation, but in trying to keep the height of 50-60 m. There was the fall speeds of up to 250-260 km / h. At this rate available deflection aileron and rudder was not enough to fend off the turns and heeling moment from the two engines that have worked for takeoff mode on one side of the wing, and zaflyugirovannye two engines on the other hand. As a result, the presence of uncontrolled slip held intense right krenenie aircraft.

After 1 minute after engine failure plane roll to the right more than 100 degrees encountered a large forest (trees height 20m). Then came the coup and its collision with the ground at an angle greater trajectory 45 degrees. As a result of the collision the plane was burned and destroyed, all who were on board were killed.

Plane crash AN-12 near Domodedovo Airport. 2007

Data on victims:

  • Total on board were people 7: 7 crew members. Total killed 7 people: 7 crew members.

Details of the crash:

  • Phase of flight: climb

  • Identified causes of the crash: the reasons for non-standard

Data on the plane:

  • aircraft Brand: An-12BP

  • Aircraft ID: RA93912

  • Country where registered aircraft: Russia

  • Date of manufacture of the aircraft: 1964

  • The serial number of the aircraft :: 4 34 17 09

Flight data:

  • Flight: LE-9655

  • Tour type: Truck

  • Aviation Company: Atran

  • The country, which was registered aviation company: Russia

  • I flew from Moscow (Domodedovo)

  • Flying in: Omsk (Central)

  • Original item: Moscow (Domodedovo)

  • A final point: Komsomolsk-on-Amur

Additional information:

Plane crash AN-12 near Domodedovo Airport. 2007

Information about the crew:

  • KBC - Igor Petrovich Zolotov

  • The co-pilot - Sergey V. Chernyshev

  • Navigator - Yuri Korobkov

The M810-06200330A frequency converter differs from the CIMRE7Z20151A chastotnikka by the actual inverter power rating, the clock frequency of the pwm operation, the self-diagnosis scheme of the frequency converter operating algorithm, and also mainly by the presence of various built-in auxiliary capabilities that are easy to set up and perform specialized tasks and completely replace the automation cabinet implementation of automated work of external equipment without the use of additional external elements such as controllers, operator panels, industrial personal computers. These factors play an important role in choosing a frequency converter for a particular application.

Error checking and subsequent reliable repair on the professional equipment of frequency converters, which are manufactured by Danfoss, delta, vesper and other global brands, are produced in the prom electric workshop. Replacement of IGBT modules, representing the most important radio components in the entire device of the converter equipment. The difference between the IGBT transistor and the IGBT module is that the module can contain one or more IGBT transistors, sometimes connected in parallel according to the Sziklai pair circuit to increase switching power, and in some cases, the control circuit. IGBT - a bipolar transistor with an insulated gate, is a powerful semiconductor device commonly used as an electronic key for medium and high voltages. By combining the advantages of a bipolar transistor and a field-effect transistor, a large switching power and a low power requirement are achieved for control, since the control is not carried out by current, but by the potential difference, which leads to high efficiency of these components.

Pages

Blog and articles

upstairs