BUAA Sino-France II. Specifications. A photo.
BUAA Sino-France II. Specifications. A photo.

BUAA Sino-France II. Specifications. A photo.


BUAA Sino-France II is a Chinese multi-purpose unmanned civil aircraft developed by specialists from the Beihai University of Aeronautics and Astronautics in 2010.

The unmanned aircraft model BUAA Sino-France II began to be designed by Chinese scientists and engineers in the second half of the 2000-ies. This aircraft was intended for civilian applications; however, the device had very wide functionality, and could be used to implement a wide range of the most diverse tasks, among which, aerial photography, monitoring, patrol, surveillance and reconnaissance flights, Control over the fire-dangerous situation, areas with extreme disasters of natural and man-made nature, etc.

The first unmanned aerial vehicle BUAA Sino-France II made its first flight in 2010 year, and thanks to the fact that the device showed very acceptable results, the drone was sent to production, however, only a few operating and operating units of this model are known to date.

The unmanned aircraft of the BUAA Sino-France II model is made in an airplane configuration, and due to the fact that the device is equipped with its own chassis system, the launch of the UAV requires a specially prepared platform, the length of which must be at least 85 meters.

The BUAA Sino-France II is equipped with a single piston petrol engine that can accelerate the device to the maximum speed of flight at 100 km / h, and the drone can carry out missions at distances up to 42 kilometers.


Specifications BUAA Sino-France II.


  • Length: Unknown;
  • Wingspan: Unknown;
  • Height: Unknown;
  • Maximum takeoff weight: unknown;
  • Cruising flight speed: 80 km \ h .;
  • Maximum flight speed: 100 km \ h .;
  • Maximum flight distance: 40 km .;
  • Maximum flight height: 3600 m .;
  • aircraft engine type: a piston;
  • Powerplant: unknown;
  • Power: unknown.



Other UAVs