other
How to make a paper rocket: photo, video

How to make a paper rocket: photo, video

Making your own rockets using handy materials is a popular hobby among Westerners. Although Russia is full of enthusiasts. Usually these are parents of young dreamers and little fidgets, students of technical universities, and just people who like to do all kinds of unusual things with their own hands. Especially for such people, we will present several ways of how to make a rocket at home from paper and other scrap materials. Experience our workshops on personal experience!

 

To give a new, exciting toy to your child, it is not necessary to attend auctions and shops of expensive children's products. Now you can make a virtual travel rocket and an intergalactic rocket with your own hands, using our step-by-step master class.

Photo 2

What materials will be needed for the rocket?

  • colored terry sock;
  • plastic bottle;
  • dense foil;
  • sheet of red felt;
  • glue gun;
  • cardboard;
  • scissors;
  • paper towel tube;
  • yellow and red yarn;
  • delicate lace.

 

How to create a space rocket from scrap materials? Step-by-step instruction

1. Take a plastic bottle, wash it and dry. Stretch the colored sock on a clean, dry container. Then tie a thin cord under the bottom of a plastic bottle and cut the tail.

Photo 3

2. Cut out a red 2 felt circle with a diameter of 5 itself. Then paste the shapes on the base of the rocket - it will be the portholes. Fix with the glue gun on the red circles the same round foil parts, but with a smaller diameter (3,5 cm).

Photo 4

3. Draw three "fins" on a piece of white cardboard. Cut out the shapes, then glue them to the rocket from the 3 side with the tip down.

Photo 5

4. Cut the ring from the cardboard tube (from paper towels or toilet paper), 5-6 wide, see. Take a thick foil and wrap the part. Wind red wool into the palm of your hand, then glue the resulting 1 side to the previously prepared part.

Photo 6

5. Similarly, make with yellow yarn. Thus, you will make the lower part of the rocket with unusual decorative flames. Use a glue gun to secure the part to the bottom of the bottle. This step-by-step master class for parents and children is completed!

Photo 7

;

How to make a beautiful bright rocket out of paper and cardboard with your own hands? Models and schemes

 

If preschool children are admired and pleased by a small toy rocket, the size of a bottle, the older children will definitely like the spacecraft "to their full height." Such an intergalactic ship will allow children to feel like real captains, and to show courage, courage and courage, as the main features of a male character.

Photo 8

Then you will learn how to make a large model of a rocket made of cardboard and paper with your own hands and see step-by-step photos of this process, which will facilitate the task.

 

Prepare the following materials:

  • colored paper;
  • carton boxes;
  • disposable plates;
  • yogurt cups;
  • plastic buttons and covers;
  • numbers and letters on a sticky basis;
  • flower pot;
  • spools of thread;
  • stencils of letters;
  • fabric segments and foam circle;
  • scissors;
  • markers;
  • satin ribbons;
  • pencil;
  • glue gun;
  • thick foil.

 

Step-by-step instructions for making paper and cardboard rocket models

1. We recommend creating this rocket with your child. Let him help you using his toy tools. As the base of the rocket will be a large box of household appliances. Best if it is from the fridge.

Photo 9

2. Make the top of a dyed flower pot, plastic spools of sewing thread and disposable tableware. Details can be decorated with voluminous stars of colored paper and pieces of satin ribbons.

Photo 10

3. Cut a round window in the front wall of the rocket. Wrap the foam circle with multi-colored satin ribbons, and then glue them to the panel in place of the porthole. Glue a few reels a little higher and mark them with sticky numbers. Thus, a small pilot will be able to more easily carry out a report of the time before the start. Below the porthole make another instrument panel, so that the rocket was even more interesting.

Photo 11

4. Equip the fuel cap using the plastic buttons. Make it on the right side of the space rocket. For this purpose can be useful coils of thread, bottle caps, old buttons from various devices.

Photo 12

5. Take care of the arrangement of the front door. To do this, draw a large oblong rectangle on the back of the rocket and cut through the 3 sides (right, top and bottom). The left side will act as a veil. Decorate the doors of the captain with decorative elements.

Photo 13

6. Draw two “legs” on a thick cardboard, cut out the parts, and then paste them over with foil. Lock the elements on the bottom of the left and right sides of the rocket. On this your spacecraft is ready. In the diagram you can clearly see how to do it correctly.

Photo 14

 

How to make a flying rocket with your own hands? Step by step instructions with photos

Using even the most primitive waste materials (cardboard tubes of napkins, boxes of chocolates, etc.), you can create an original rocket with your own hands that could fly. Let her not be able to plow the expanses of the Universe, but then she will definitely travel around the nursery. Use our step by step photos to make your children a nice and interesting toy.

Photo 15

Materials needed for a flying paper rocket:

  • tube from paper towels;
  • glue;
  • thick cardboard;
  • pencil;
  • scissors;
  • gouache paints and brushes;
  • yarn;
  • permanent marker;
  • straw for drinks.

Step by step instructions with photos on making a flying rocket do it yourself

1. Prepare the cardboard parts needed for the future product. Divide the long tube into two parts (short and long - 1 to 3). Make a cut on 3 in both details, as you can see in the photo. Cut wings, pillars and other items from a flat sheet of cardboard.

Photo 16

2. Collect all the details in the rocket layout. If they are poorly fixed, correct or remove cuts.

Photo 17

3. If the elements converge normally, reassemble the designer again and can paint them in white gouache. Leave the characteristic inscriptions and drawings with a black pigment marker.

4. Fold the paper racket, then glue the parts together with white glue or silicone glue gun. Attach a straw to the spacecraft along the body and fix it with adhesive tape.

Photo 19

5. Draw a thick thread through a straw and pull it from wall to wall. That's all the manipulations to create a rocket from paper that flies. For a spacecraft to fly through a room, just pushing it a little.

Photo 20

Instructions for making a rocket from a bottle with a trigger mechanism so that it takes off

If the children have long grown up and are not interested in toy models made of cardboard, you can offer them to make an uncomplicated rocket with a satellite mechanism that would effectively fly high. Do not hesitate, the trick with the take-off of the spacecraft will delight even an adult, not to mention adolescents.

Photo 21

Materials for making a simple rocket from a bottle with a trigger mechanism

  • two types of cardboard: thin and dense;
  • plastic bottle;
  • Scotch;
  • pencil;
  • wine cork;
  • plasticine;
  • Bicycle Pump;
  • scissors.

Instructions for making a simple rocket with a trigger mechanism

1. Take a sheet of thin cardboard and roll it into a cone. Then trim the edge to get a flat figure.

Photo 22

2. Paint over the finished cone with colored tape, which will increase its water resistance.

Photo 23

3. Wash and dry the plastic bottle. Paint it in any color, you can make an inscription or draw an emblem.

Photo 24

4. Cone (the main part of the rocket) glue to the bottom of the bottle with liquid silicone. Make the construction as flat as possible.

Photo 25

5. Cut three or four right triangles from thicker cardboard. Glue all the parts to the bottle. Thus, the rocket will appear tail keels. Well, if the "legs" will end at the extreme point of the neck of the bottle.

Photo 26

6. Weight the bottom of the rocket. For this purpose, wrap a piece of clay around the neck of the container and mask the load with adhesive tape.

Photo 27

7. Pour the 1 liter of water into the bottle.

Photo 28

8. Make a thin hole in the wine cork using a needle. The size of the hole in any case should not exceed the diameter of the needle from a bicycle pump.

Photo 29

9. Insert a cork in the neck of the bottle. Then firmly insert the needle from the bicycle pump so that it does not jump out.

Photo 30

10. Take your rocket neck to the top, then connect to the pump. Turn the spaceship over and set it so that it does not fly in your direction.

Photo 31

11. Inflate the rocket with air, holding it with your hand. Release the craft and continue to pump air. A simple rocket made of plastic mechanism will take off when the cork can no longer hold the pressure.

Photo 32

These are simple options for creating a rocket from paper with your own hands. Good luck!

Blog and articles

upstairs