«Omsk Engine Production Association named after PI Baranov"

Technological capabilities of the plant are as follows:

Mechanical restoration:

The main production plant produces mechanical parts processing, using the most advanced process technologies of today, such as:

• - Depth of grinding elements shelves and Christmas locks rotor blades of turbines and turbine and turbojet engines (turbojet, CCD);
• - Treatment of the upper retaining flange of turbine blades in modern lathes with handling precision Diamond ruling rollers abrasive wheel;
• - Electrochemical machining feather vanes and compressor rotor blades of turbines and turbine and turbojet engines (turbojet, CCD);
• - EDM nozzle and work sectors and turbine blades and other components; - Vibrosverlenie and deep drilling of large parts such as shafts;
• - Hardening of the surfaces of the parts;
• - Turboabrazivnaya polished details such as disks;
• - Waterjet machining the inner space of the blades and the turbine and turbojet engines (turbojet, CCD);
• - Machining on machining centers multioperation;
• - Electrical upsetting hardware;
• - Processing of bevel and cylindrical gears internal and external gearing up to 0 800mm, with oblique and straight and circular tooth;
• - Laser drilling;
• - Firmware and pulling;
• - all types of grinding, including deep grinding, electrochemical grinding, honing, lapping and so on.
•  

Compression processing of metals:

It produces stamping and forging of various metals and alloys, including high-strength alloy with desired properties for special purposes:

• - stamping of sheet parts from heat-resistant titanium and stainless alloys, including punching, cutting, deep drawing from a sheet up to 8 mm thick, forming;
• - Hot forging blanks such as disks, rings, compressor blades and turbine instruments, stainless, titanium and superalloys.
• The equipment of technological complexes allows to produce volumetric and sheet forgings and stampings weighing from 0,1 to 100 kilograms.

Foundry:

The plant billet molding parts made of steel, cast iron and high-temperature alloys and non-ferrous metals, including special features and characteristics. By the method of casting is:

• - Investment casting, including injection-cast vehicles and nozzle vanes with a ready gas path;
• - Die-casting of aluminum alloys;
• - Chill casting of magnesium and aluminum alloys;
• - Earthen casting;
• - centrifugal casting from brass bronze, alloys, special cast irons;
• - Art castings, including various cultural composition.

Weighing of the cast blanks can range from a few grams to 100 kg and above.

View the rest of the plants