RoboSeed Nano. Specifications. Photo.
RoboSeed Nano. Specifications. Photo.

RoboSeed Nano. Specifications. Photo.


RoboSeed Nano - American miniature unmanned aerial vehicle, designed by «RoboSeed».

Design of unmanned aerial vehicles RoboSeed Nano model was deployed designer Evan Ulrich in 2000-ies. At its core, this drone is a design created in the design preferences, and does not have any particular purpose of its application, which, however, does not exclude scientific interest in this development, as the device has and is very compact, and has a fairly good Flight -technical indicators that provide drone popularity.

The design of an unmanned aerial vehicle RoboSeed Nano is made in the configuration monokoptera, and in its essence, this configuration was first used on unmanned aerial devices.

Unmanned aerial vehicle model RoboSeed Nano has a compact design - with a wingspan of just 30 centimeters, weight of the device is about 100 gram that allows drone to have high speed flight. However, the same factor affected the sustainable management of unmanned aircraft, as at a wind speed of over 3 m \ s, control of the device is practically impossible.

Despite the compact design of an unmanned air RoboSeed Nano vessel, the drone has a built-in GPS, a video camera, and an altimeter. Which greatly increases the operational capabilities of the UAV.

Powerplant drone RoboSeed Nano represented by one electric motor, which is able to overclock the device to the maximum speed of movement in 20 km \ h., While the maximum flight range of this device is limited to distance 5 kilometers.


Specifications RoboSeed Nano.


  • Length: Unknown;
  • Wingspan: 0,3 m .;
  • Height: Unknown;
  • Maximum takeoff weight: 0,1 kg .;
  • Cruising flight speed: 10 km \ h .;
  • Maximum flight speed: 20 km \ h .;
  • Maximum flight distance: 5 km .;
  • Maximum flight height: 1000 m .;
  • aircraft engine type: Electric;
  • Powerplant: unknown;
  • Power: unknown.



Other UAVs


Read more on: