ServoHeli-40. Specifications. A photo.
ServoHeli-40. Specifications. A photo.

ServoHeli-40. Specifications. A photo.


ServoHeli-40 is a Chinese unmanned aerial vehicle developed by the Shenyang Institute of Automation for civilian applications.

The unmanned aircraft of the ServoHeli-40 model was designed by Chinese aircraft builders from the Shenyang Automation Institute for application in solving civilian targets and tasks. This drone can be used for reconnaissance, observation, patrol and monitoring missions, as well as for aerial photography and aerial photography of the area, control of motor roads and fire hazard conditions, etc.

The Chinese unmanned aircraft ServoHeli-40 is designed in a helicopter-type configuration, because from the point of view of experts, it was this design that could be best suited for the realization of the conceived tasks and the fulfillment of the above-mentioned goals. Moreover, it is important to take into account also the fact that the unmanned aerial vehicle of the model has small dimensions, in particular, with the length of its fuselage in 2 meter 68 centimeters, the diameter of the main rotor of the drone is 2 meter 15 centimeters, however, the maximum take-off weight does not exceed 40 Kilogram, which provides simplicity both during transportation of the drone and during operation.

Multifunctional unmanned aerial vehicle ServoHeli-40 is equipped with one piston internal combustion engine, which has tractive power in 8 hp, is able to give the device a maximum speed of flight at 100 km / h, however, the effective range of UAV flight does not exceed 5 kilometers.


Technical characteristics ServoHeli-40.


  • Length: 2,68 m .;
  • The diameter of the rotor: 2,15 m .;
  • Height: 0,72 m .;
  • Maximum takeoff weight: 40 kg .;
  • Cruising flight speed: 70 km \ h .;
  • Maximum flight speed: 100 km \ h .;
  • Maximum flight distance: 5 km .;
  • Maximum flight height: 1000 m .;
  • aircraft engine type: a piston;
  • Powerplant: unknown;
  • Power: 8 hp



Other UAVs