Helicopter Rotorfly RI30 Eaglet. Specifications. A photo.
Helicopter Rotorfly RI30 Eaglet. Specifications. A photo.

Helicopter Rotorfly RI30 Eaglet. Specifications. A photo.


Rotorfly RI30 Eaglet - Russian double multipurpose helicopter developed in the year 2005 the Kumertau Helicopter Plant.


Photo Rotorfly RI30 Eaglet


Designing an aircraft model Rotorfly RI30 Eaglet engineers began Kumertau helicopter factory in the early 2000-ies. The multipurpose aircraft intended primarily for private exploitation, and, compared to other ultra-light aircraft of this class, the feasibility of helicopter Rotorfly RI30 Eaglet were much wider, which should provide the model widespread support among potential customers.

Despite the fact that the cabin layout helicopter Rotorfly RI30 Eaglet performed in a tandem configuration - pilot and passenger seats are arranged one behind the other, helicopter Rotorfly RI30 Eaglet is compact enough aircraft has high maneuverability and good handling, making flights on this aircraft devices safe enough.


Rotorfly RI30 Eaglet photo


The Rotorfly RI30 Eaglet was first introduced to the general public in 2005, however, the actual production of these aircraft began much later. Initially, the Rotorfly RI30 Eaglet model did not satisfy its customers in that it was produced exclusively as self-assembly kits, which required additional time and availability of a certain experience, a specialized tool, etc. In 2008, the production of Rotorfly RI30 Eaglet aircrafts was carried out by the Kamov Design Bureau, which began to produce aircraft in an already fully assembled state.

Despite a great promise of aircraft models Rotorfly RI30 Eaglet, widespread data helicopters almost did not get - today in operation is only a few units of the aircraft, however, to a greater extent this is due to the lack of prevalence of private owners of air equipment in the country .


Helicopter Rotorfly RI30 Eaglet


In the cockpit of the helicopter Rotorfly RI30 Eaglet can accommodate up to two people - a pilot and one passenger, and, in addition to the transport of persons and exploitation of the helicopter for private purposes, the aircraft can also be used for transporting small loads, the only condition which is the exceeding of the maximum take-off weight of the aircraft system, component 500 kg.

The helicopter is equipped with Rotorfly RI30 Eaglet powerplant piston type Rotax 912ULS, able to develop power in 100 hp, which is quite acceptable for light aircraft. Through the use of this aircraft engine, aircraft Rotorfly RI30 Eaglet can accelerate to its maximum speed in 170 km \ h., And to overcome the distance in kilometers 350.


Specifications Rotorfly RI30 Eaglet.


  • Crew: 1 people;
  • Capacity: 1 people;
  • helicopter length: 5,3 m .;
  • The height of the helicopter: 2,6 m .;
  • The diameter of the rotor: 6 m .;
  • Weight of empty helicopter: 250 kg .;
  • Maximum takeoff weight: 500 kg .;
  • Cruising speed: 140 km \ h .;
  • Maximum flight speed: 170 km \ h .;
  • Maximum flight distance: 350 km .;
  • Maximum flight height: 4000 m .;
  • Powerplant: Rotax 912ULS;
  • Power: 100 hp


View other helicopters


Blog and articles